Analog input does not work

[EhsanRasouli1371]

Arduino analog inputs are named as A0, A1,...
How do I enter their pin name?

# Set how many Analog Inputs you have programmed in Arduino and which pins are Analog Inputs, you can set as many as your Arduino has Analog pins. List the connected pins below.
AInputs = 1				#number of AInputs, Set AInputs = 0 to disable 
AInPinmap = [1]			#Potentiometer connected to Pin 1 (A0)

#ifdef AINPUTS
  const int AInputs = 1;
  int AInPinmap[] = {A0};                //Potentiometer for SpindleSpeed override
  int smooth = 2;                     //number of samples to denoise ADC, try lower numbers on your setup 200 worked good for me.
#endif

#ifdef AINPUTS
void readAInputs(){
  static unsigned int samplecount = 0;

   for(int i= 0;i<AInputs; i++){

    if (samplecount < smooth) {
      sumAinput[i] = sumAinput[i] + analogRead(AInPinmap[i]);
    }
    else {
      sumAinput[i] = sumAinput[i] / smooth;
      if(oldAinput[i]!= sumAinput[i]){
        oldAinput[i] = sumAinput[i];
        sendData('A',AInPinmap[i],oldAinput[i]);
      }
      sumAinput[i] = 0;
    }
   }

  if(samplecount < smooth){ samplecount = samplecount + 1;}
  else {samplecount = 0;}

}
#endif

I changed this line of code but I still don't get the analog input value
sendData('A',i+1,oldAinput[i]);

[AlexmagToast]

Hi,
AInputs = 2
AInPinmap = [0,1]
const int AInputs = 2;
int AInPinmap[] = {0,1};

This should do the Trick.
sendData('A',i+1,oldAinput[i]); won't work.

[EhsanRasouli1371]

I tried this
But in hal show, the analog value does not change
It makes sense that it doesn't work because we actually want to read an analog value from pin number 0 and 1.

analogRead(AInPinmap[i])

[AlexmagToast]

what is the Output in Arduino IDE Serial Terminal after you send E: ?
You should see something like A0:150 for example when you turn your poti.

[EhsanRasouli1371]

No, I don't see anything like that

[AlexmagToast]

check if you did uncomment #define AInputs

[EhsanRasouli1371]

These are my files
File2ino.txt
Filepy.txt

[AlexmagToast]

change //#define AINPUTS to #define AINPUTS

[EhsanRasouli1371]

thank you very much
it works

[AlexmagToast]

you're welcome